具有高色澤、高色彩、高遮蓋力、高穩定性、耐酒精及耐磨擦之特點。 印刷：絲印移印均可。 表干及實干時間：表干時間自然揮發5-10分鐘；實干時間在24小時以內。 稀釋及清洗：SV3慢干開油水、UVK1（移印開油水）同時可使用718洗網水清洗。 測試方法（完全干燥后）： 1、3m膠紙粘在畫有百格的油墨表面，45度角迅速拉起不脫油; 2、度99%的工業酒精，一千克砝碼用棉布包住在油墨表面，以水平力來回拉200次無脫色; 3、 耐磨：橡皮擦500g力水平來回擦500次。 使用方法： 1、使用前應充分?jǐn)嚢瑁煤箅S時封閉； 2、攪拌時加開油水10-15%，稀釋到印刷粘度； 3、網板塞網時可用洗網水清洗； 4、不得與其它類型油墨混合使用。 注意事項： 1、塑膠材料的外觀相似，但可能會是不同的材料，客戶需試印確定其符合要求后，再批量印刷； 2、在移印過程中，如出現拉絲或散開，可適當加入一些慢干膏即可; 3、環境溫度過高，將會影響油墨原有質量； 4、根據氣候變化，請遠離火源，陰暗環境下存放。 Oles MPE Plating Ink MPE plating strengthening series ink characteristics : mainly used in plating surface, enhanced surface, vacuum plating surface.PU surface.UV surface and other materials, with a high color, high color, high covering power, high stability, high alcohol and rub characteristics. Printing: screen printing can be. Surface drying and drying time: surface dry time natural volatile 5-10 minutes; work time within 24 hours. Dilution and cleaning: SV3 slow dry open water, UVK1 ( printing open water) can be simultaneously used 718 washing network water cleaning. Test method ( completely dry ): 1, 3M gummed paper in the paintings of the surface of the ink, 45 degree angle quickly pulled off the oil; 2, 99% of the purity of industrial alcohol, one kilogram of weight of cotton pack in the ink surface, with a horizontal force pulling back and forth 200 times without decolorization; 3: oak, wear resistance eraser 500g force level brush back and forth 500 times. Usage: 1, use should be fully stirred, use at any time after the closure; 2, add water mixing 10-15%, diluted to 3, screen printing viscosity; the plug is available when washing network water cleaning; 4, not with other types of ink mixing. Note: 1, the plastic material similar in appearance, but may be of different materials, customers need to try to determine its requirements, and then batch printing; 2, in the printing process, such as drawing or spread out, may be appropriate to add some slow dry plaster; 3, the ambient temperature is too high, will affect the quality of the original ink; 4, according to climate change, please stay away from fire, dark environment storage.